What are the precautions for daily use of self-priming pumps

November 22, 2021
Publisher: DONJOY

What are the precautions for daily use of self-priming pumps?

 

1. First check whether the bolts are loose everywhere, whether the power cord and plug are in good condition, and the insulation resistance of the motor should be greater than 2 megohms.

 

2. In order to prevent electric shock accidents, corresponding security measures such as leakage circuit breakers or electric shock protectors must be installed, and reliable grounding must be carried out.

 

3. The operating voltage range of the self-priming pump must be between +5% and -12% of the rated voltage, otherwise the service life of the motor will be shortened or burned out. If the electric pump is used far away from the power source, the power transmission line should be thickened appropriately, otherwise the voltage will drop and it will not be able to operate.

 

4. Turn on the power switch, let the pump idling for about 2 minutes, and check whether it is started, running normally, and the direction of rotation is correct.

 

5. Fix the pump body with steel pipe or rubber tube (not too soft to avoid flattening); Connect the water inlet and the bottom valve. The bottom valve must be placed perpendicular to the horizontal plane and above the water bottom 30Cm to avoid sucking in the sand.

 

6. Before using for the first time, fill the water storage tank with water. After tens of seconds after power on, the water cannot be automatically discharged, and there is no need to fill the water in future use.

 

7. When using, the motor should be kept dry, pay attention to the drop of the water level, and the bottom valve should not be exposed out of the water surface. When the temperature is lower than 40C. Anti-freezing work should be done to avoid freezing and cracking the pump body.

 

8. If it is not used for a period of time, drain the water in the pump (self-priming pumps and automatic pumps dump the water in the water storage tank); scrub the main parts clean, coat them with anti-rust oil, and place them in a ventilated and dry place for later use.

Download The Latest Product Information
Technical Service
Send Message
sub

According to ASME BPE, EHEDG, FDA and 3A standard, DONJOY got certificates of PED-97/23/EC and MD-06/42/EC issued by TUV, ……

GET IN TOUCH NOW
×
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All